TS-G3 TruSignal SpO2 Adapter Cable For GE

EX082   spo2 adapter cable , 11pin -> DB9 female , 2.5M    

OEM Part no.: TS-G3 

Designed to bridge GE SpO2 modules with compatible monitoring systems, the TS-G3 adapter cable redefines reliability in non-invasive oxygen tracking. At its core is a shielded oxygen-free copper (OFC) conductor that minimizes electromagnetic interference (EMI)-a common culprit of distorted SpO2 waveforms in busy clinical settings .

The Spo2 adapter cable's 11pin male connector locks seamlessly into GE monitors (e.g., Carescape ProCare V100 ), while the gold-plated DB9 female end ensures a secure, corrosion-resistant link to SpO2 sensors. Encased in medical-grade TPU (latex-free, DEHP-free), it withstands 500+ cycles of alcohol/bleach disinfection without cracking-ideal for infection-control protocols in ICUs and emergency departments. The 2.5m length strikes the perfect balance: long enough to accommodate patient movement during transport, yet compact enough to avoid tripping hazards at the bedside.

1. TruSignal-Enhanced Signal Integrity

Shielded OFC conductors block EMI from nearby medical devices (e.g., ventilators, defibrillators), ensuring SpO2 readings deviate by ≤0.5% from actual values-meeting GE's OEM accuracy standards.

2. Dual-Lock Connector Design

The 11pin end features a built-in latch that clicks into GE monitors to prevent accidental disconnection during patient transfers, while the gold-plated DB9 end resists corrosion for 2+ years of reliable use.

3. Infection-Control Ready

Medical-grade TPU jacket withstands harsh hospital cleaners without degrading, eliminating the risk of fluid ingress or insulation cracking-critical for sterile environments like operating rooms.

4. Clinical-Grade Flexibility

Maintains flexibility at temperatures from -10°C to 60°C, performing consistently in cold storage (for transport) and warm ICU settings without stiffening.

Applicable Population

• Critically Ill Patients: ICU/CCU patients requiring continuous SpO2 monitoring (e.g., post-surgery, respiratory failure).
• Mobile Patients: Individuals being transported between hospital units or in ambulances.
• Routine Care Recipients: Outpatients undergoing anesthesia, dialysis, or respiratory therapy.

Applicable Industry

• Hospitals & Clinics
• Emergency Medical Services (EMS)
• Home Healthcare Providers
• Medical Equipment Distributors & Service Centers

Applicable Fields

• ICU/CCU: Continuous oxygen saturation tracking for ventilated patients.
• Emergency Department: Rapid SpO2 assessment during trauma or respiratory distress triage.
• Operating Room: Real-time monitoring during surgery to avoid hypoxemia.
• Ambulance Transport: Stable signal transmission during patient movement.
• Dialysis Centers: Routine monitoring of patients with kidney failure.

This adapter cable serves as the critical link between GE monitors and SpO2 sensors, enabling:

Real-time detection of hypoxemia (low blood oxygen) in high-risk patients.

Accurate oxygen saturation data for adjusting ventilator settings or oxygen therapy.

Seamless monitoring during patient movement (no signal loss or disconnection).

Compliance with infection-control protocols via durable, disinfection-ready construction.

Usage Method

Pre-Use InspectionCheck the cable for damage (e.g., frayed jacket, bent pins). Ensure connectors are clean and free of debris .

Connect to GE MonitorAlign the 11pin male connector with the SpO2 port on your GE monitor and push until you hear a "click" (latch engaged).

Link to SpO2 SensorInsert the DB9 male end of your SpO2 sensor into the cable's DB9 female connector-twist slightly to secure.

Verify SignalAttach the sensor to the patient (finger/toe/earlobe) and power on the monitor. Confirm a clear, stable SpO2 waveform (no artifacts) within 2 seconds.

Post-Use CareDisinfect the cable with hospital-grade cleaner after each use. Avoid pulling the cable by the conductors-hold connectors when disconnecting.

TS-G3 TruSignal SpO2 Adapter Cable for GE

This isn't just an adapter cable-it's the backbone of reliable oxygen monitoring. With shielded TruSignal technology, infection-control durability, and GE-perfect compatibility, it ensures clinicians get accurate SpO2 data when every second counts. Backed by our engineering expertise, strict quality controls, and global certifications, it's the trusted choice for hospitals, EMS teams, and distributors who refuse to compromise on patient safety.

Whether you need bulk orders for a hospital chain or custom lengths for specific devices, our flexible MOQs (starting at 1 unit) and 3-7 days lead time make us your seamless partner in medical connectivity.

Hot Tags: ts-g3 trusignal spo2 adapter cable for ge, China, manufacturers, customized, bulk, buy discount, low price, high quality