Manufacturer: Biolight Co., LTD

MPN: 15-100-0358

Art. No.: 149860

Biolight's analog Encrypted 9pin spo2 sensor is a highly advanced medical device that is designed to accurately measure a patient's blood oxygen saturation levels. This innovative product is equipped with state-of-the-art technology that ensures maximum accuracy and reliability, making it an ideal choice for medical professionals who demand the very best.

iencryption technology. This ensures that the data being transmitted is fully protected and secure, giving patients and medical professionals added peace of mind.

durability and reliability. It has been rigorously tested to ensure that it can withstand the rigors of everyday medical use, and it is designed to last for many years.

very easy to use. It is quick to set up and simple to operate, making it a great choice for busy medical professionals who need to.

Comply with ISO.FDA

Warranty period/period of validity:

period of validity:N/A

Warranty 12Months

Payment & delivery terms:

Price Term EXW/FOB/CFR/CIF Shenzhen available

Payment Term T/T, PayPal, Western Union available

Delivery Method Air/Sea/Express; DHL/UPS/FedEx/TNT/EMS,etc

Lead time 5-7working days after payment confirmed

1) Hold the sensor with its opening towards the patient's index finger, toes, palm or sole. The side with a finger or toes
sign is placed on the top, detail is as follows:

2) Put the patient's measurement part into the sensor until the tip against at the end of the sensor.
3) Adjust the measurement part to be placed evenly on the middle base of the sensor.
4) Direct the cable along the top of the patient's hand or foot.
5) Plug the sensor into the proper oximeter and verify operation as described in the oximeter operator's manual.
6) Inspect the sensor site every 2 hours for skin integrity.
10. Cleaning & Disinfection
1) Unplug the sensor before cleaning or disinfecting.
2) Dip clean the applied part (sensor part) in a mild detergent solution, or a 70% isopropy alcohol solution. If low-level
disinfection is required, use a 1:10 bleach solution.
3) Clean the sensor part (not the connector) with the wet cloth ,and then dry it up with the dry cloth in the end.

1) This sensor is only use with compatible patient monitors or pulse oximeter.
2) User should verify the compatibility of the monitor, sensor, and cable before use, otherwise cause patient injury.
3) Check the site every 2 hours (more frequently if perfusion is poor).
4) Routinely check to ensure adequate distal circulation to the sensor site.
5) Carefully route cables to reduce any possibility of patient entanglement or strangulation.
6) Patient conditions (such as reddening, blistering, skin discoloration, ischemic skin necrosis, and skin erosion) may
warrant changing the site frequently or using a different style of sensor.
7) Do not use the sensor if the sensor or the cable appears damaged.
8) This device is not intended for use in a magnetic resonance imaging (MRI) environment.
9) Conditions that may cause inaccurate reading and impact alarms include interfering substances, excessive ambient
light, electrical interference, excessive motion, low perfusion, low signal strength, incorrect sensor placement, poor
sensor fit, and movement of the sensor on the patient.
10) Do not use a blood pressure cuff or arterial blood pressure measurement device on the same limb as the sensor site.

11) It is possible for any device to malfunction; therefore, always verify unusual data by performing a formal patient
assessment.
12) The sensor should be disinfected before each use.
13) Disposal of the sensors should comply with local regulation

Hunan Greatmade Medical Tech LTD is a prefessional manufacturer of medical cable , which is widely use with multi-parameter patient monitor , pulse oximeter, EKG device, blood pressure montior , electrosurgical unit. We have 10 years experience in this field . We have our own factory in Shenzhen China Mainland , and have complete manufacturing device and test device.We also build professional Research and Development team to satisfy various market need . Our superior quality , advantageous price and thoughtful service have wined our national and international customers' permanent support .

Our products is including below

(1). Reusable/disposable spo2 sensor , spo2 adapter cable
(2). Patient monitor ECG cable and leadwires
(3). Electrocardiograph cable and leadwires .
(4). Reusable /Disposable Blood pressure blood (NIBP )cuff . infusor bag .
(5). patient monitor TEMP temperature probe
(6). Patient monitor IBP cable and IBP transducer
(7). ESU pencil
(8). Pull-push self-lock circular plastic /Metal connector .

Feedback:

Your Feedback is really important to us,If you are satisfied with the purchased products, please leave us a five-star feedback. If not satisfied, please contact us before leaving a negative feedback. We will do our best to help you solve the problem. Thank you for your cooperation and understanding.